SPEKTRA FACADE ACRYL

SPEKTRA Facade Acryl is a facade paint intended for the protection and decoration of exterior walls. It is formulated based on an acrylic binder and provides good resistance to weather influences, moisture, and industrial environments, making it suitable for long-term protection of facade surfaces.

It can be applied to mineral and dispersion plasters, concrete, fiber-cement and wood-cement boards, as well as old dispersion coatings. Before application, the surface must be clean, dry, and solid. Loose parts of the coating are removed down to a healthy substrate, and irregularities are repaired with appropriate mineral-based materials.

The paint is water-thinnable and easy to apply. It is applied by roller, brush, or spraying, and if necessary, it is thinned with water from 5% to 10%. The surface is dry and ready for the next coat after approximately 6 to 10 hours under normal conditions.

The coating has good water repellency and resistance to wet scrubbing, while vapor permeability allows water vapor to pass through the wall structure.

It can be tinted online before ordering according to the NCS and EXTERIOR charts.

For substrate preparation, the use of SPEKTRA ACRYLIC IMPREGNATION or SPEKTRA ACRYLIC IMPREGNATION SPECIAL is recommended, while SPEKTRA DEEP IMPREGNATION is used for concrete and other non-porous surfaces.

A 2 L pack covers approximately 12 to 16 m2 of surface in a single coat, depending on the structure and absorbency of the substrate, application method, and working conditions.