SPEKTRA LATEX MATT

SPEKTRA Latex Matt is an interior wall and ceiling paint intended for surfaces exposed to high wear and frequent cleaning. Due to its high washability, it is particularly suitable for corridors, hallways, staircases, kindergartens, schools, hospitals, and other public spaces. The finish is matte.

It can be applied to mineral plasters, concrete, gypsum boards, glass fiber wallpapers, paper relief wallpapers, and old dispersion coatings. It is applied by roller, brush, or airless spraying. If necessary, it is thinned with water up to 5%. The substrate must be clean, dry, and solid before painting.

This interior paint has very high washability, class 1 according to EN 13300, meaning surfaces can be cleaned without damaging the coating. Vapor permeability is class V1, high vapor permeability. The coating is dry and ready for the next coat after 4 to 6 hours at a temperature of around 20°C.

It can be tinted online before ordering according to the NCS, INTERIOR COLOUR COLLECTION, and EXTERIOR COLOUR COLLECTION charts.

Related products: For new substrates, 1x SPEKTRA ACRYLIC IMPREGNATION or SPEKTRA ACRYLIC IMPREGNATION SPECIAL is used, and for concrete and other non-porous substrates, 1x SPEKTRA DEEP IMPREGNATION is used. For surface leveling, SPEKTRA LEVEL Medium or Fine is used. Surfaces affected by mold are treated with SPEKTRA SANITOL with the addition of SPEKTRA ANTI MOULD protection in the paint. Stains are blocked with SPEKTRA STAIN BLOCK primer or SPEKTRA ANTI-NICOTINE PAINT.

A 10 L pack covers approximately 140 to 180 m2 of surface in a single coat, depending on the structure and absorbency of the substrate, application method, and working conditions. It is intended for the protection and decoration of walls and ceilings in interior spaces with higher loads.