SPEKTRA LEVEL TERMO

SPEKTRA LEVEL TERMO is a thermal insulation compound for internal wall surfaces based on hollow glass beads that absorb, retain, and reflect heat back into the room. It reduces heat loss through walls in winter and mitigates heat penetration from the outside in summer. This contributes to reducing heating and cooling costs and helps solve problems of thermal bridges and condensation.

It is suitable for mineral and already painted internal wall surfaces. It has low weight, good adhesion, and elasticity, so it can bridge fine cracks. It does not contain volatile organic compounds and contributes to healthier living conditions.

It is applied with a stainless steel trowel. It is not thinned. Minimal working temperature is +5 °C. The next coat can be applied after 10–12 hours. Sanding between coats is not necessary, and final sanding is done if needed with 150 grit sandpaper.

Theoretical consumption is approximately 2 l per m2 in two coats with a total thickness of about 4 mm (2 mm per coat). Practical consumption depends on the application thickness and substrate quality.

A 15 l pack covers approximately 7.5 m2 in a two-coat system with a total thickness of about 4 mm.

Related products are SPEKTRA ACRYLIC IMPREGNATION or SPEKTRA ACRYLIC IMPREGNATION SPECIAL for substrate preparation, SPEKTRA LEVEL FINE for fine leveling, and SPEKTRA TERMO TOP as the recommended topcoat.