SPEKTRA LEVEL TERMO

SPEKTRA LEVEL TERMO is a thermal insulation compound for internal wall surfaces based on hollow glass beads that absorb, retain, and reflect heat back into the room. In this way, it reduces heat loss through walls in winter and decreases heat penetration from the outside in summer. It contributes to reducing energy consumption for heating and cooling and helps solve problems of thermal bridges and condensation.

It is suitable for mineral and already painted internal wall surfaces. It is characterized by low weight, good adhesion, and elasticity, so it can bridge fine cracks. It does not contain volatile organic compounds and creates more favorable conditions for staying in the space.

It is applied with a stainless steel trowel. It is not thinned. Minimal working temperature is +5 °C. The next coat can be applied after 10–12 hours. Sanding between coats is not necessary, and final sanding is done if needed with 150 grit sandpaper.

Theoretical coverage is approximately 2 l per m2 in two coats with a total thickness of about 4 mm (2 mm per coat). Practical consumption depends on the application thickness and substrate quality.

A 5 l pack covers approximately 2.5 m2 in a two-coat system with a total thickness of about 4 mm.

Related products are SPEKTRA ACRYLIC IMPREGNATION or SPEKTRA ACRYLIC IMPREGNATION SPECIAL for substrate preparation, SPEKTRA LEVEL FINE for fine smoothing, and SPEKTRA TERMO TOP as the recommended topcoat.