TESSAROL ACRYLIC ENAMEL SATIN

TESSAROL acrylic enamel satin is a topcoat for high-quality protection and decoration of wood and metal surfaces, such as windows, doors, wood paneling, fences, simple structures, and simple furniture, in indoor and outdoor areas. The coating is environmentally friendly, odorless, elastic, and resistant to household cleaning agents, while white and light shades do not yellow.

It is applied with a synthetic fiber brush, microfiber or felt roller, or air spraying with thinning as needed. The temperature of the paint, air, and substrate should be at least +8°C, and relative air humidity below 80%. At +20°C and 65% relative humidity, it is dust dry in about 1 hour, dry to touch in 2-3 hours, and the intercoat interval is 8-10 hours. Tools are washed with water immediately after use, and dried paint is removed with TESSAROL NITRO thinner.

In one coat, it covers approximately 10-12 m2 per 1 l, and consumption depends on the finish and type of surface, application method, and chosen shade. The product is water-thinnable. Online tinting before ordering is possible according to NCS, interior colour collection, and exterior colour collection on the HGMIX system.

A 2.6 l pack covers approximately 26 - 31.2 m2 of surface per single coat, depending on the structure and absorbency of the substrate, application method, and working conditions. It is intended for the protection and decoration of wood and metal surfaces in indoor and outdoor areas.

As a primer for wood indoors, TESSAROL ACRYLIC WOOD PRIMER is used. Outdoors, BORI IMPREGNATION WITH BIOCIDE W is followed by TESSAROL ACRYLIC WOOD PRIMER. For iron, steel, galvanized sheet, copper, aluminum, and hard PVC, TESSAROL ACRYLIC UNI PRIMER is used (1x indoors, 2x outdoors).