TESSAROL PU ACRYLIC ENAMEL SATIN

TESSAROL PU ACRYLIC ENAMEL is a satin topcoat for high-quality protection of wood and metal surfaces, such as windows, doors, wood paneling, fences, structures, and simple furniture, in indoor and outdoor areas. It forms a hard and elastic wear-resistant layer with stable gloss and shade, while white and light shades do not yellow.

It is applied with a synthetic fiber brush, microfiber or felt roller, as well as by spraying. It is thinned with water as needed. The temperature of the paint, air, and substrate must be at least +10°C, and air humidity below 80%. Dust dry in about 1 hour, dry to touch in about 2 hours, and the next coat is applied after 4-6 hours. Tools are washed with water immediately after finishing work.

It covers approximately 10-12 m2 per 1 l in one coat, depending on the substrate and application method. The product is environmentally friendly, with very low VOC content and no unpleasant odors. It is also suitable for children's toys in accordance with the SIST EN 71-3 standard. Online tinting before ordering is possible according to NCS, interior colour collection, and exterior colour collection via the HGMIX system.

A 0.75 L pack covers approximately 7.5 - 9 m2 of surface per single coat, depending on the structure and absorbency of the substrate, application method, and working conditions. It is intended for the protection and decoration of wood and metal surfaces in indoor and outdoor areas.

As a primer for wood indoors, TESSAROL ACRYLIC WOOD PRIMER is used. Outdoors, BORI IMPREGNATION WITH BIOCIDE W is followed by TESSAROL ACRYLIC WOOD PRIMER. For iron, steel, galvanized sheet, copper, aluminum, and hard PVC, TESSAROL ACRYLIC UNI PRIMER is used (1x indoors, 2x outdoors).