TESSAROL VARNISH SATIN

TESSAROL varnish satin is a colorless topcoat intended for the protection of wood in indoor rooms when we want to keep and emphasize the visible wood structure with a more discrete, silky final appearance. It dries quickly, levels well, and is resistant to household cleaning agents.

It is applied by brush, roller, or airless spraying. It is ready for use and does not require thinning. The minimum working temperature is +5°C. Wood must be dry, with moisture up to 15% for conifers and 12% for deciduous wood. The surface should be sanded and cleaned, and NITRO thinner used to remove wax, resin, and grease residues. For new wood, 2 layers of varnish are recommended, and for old coatings, 1 to 2 layers after cleaning and sanding.

It covers from 10 to 12 m2 per liter in a single coat, depending on the type of wood and finish and the application method. Dust dry in about 5 hours, touch dry in 6 to 8 hours, and the intercoat interval is 24 hours. It is available in a colorless satin variant. It is not tintable.

A 0.75 l pack covers approximately 7.5 - 9 m2 of surface per single coat, depending on the structure and absorbency of the substrate.

Related products are BORI thin-layer stain for decorative effect and prior protection and BORI impregnation with biocide W for humid rooms, as well as TESSAROL thinner for cleaning tools.